Measuring Standards:

1. GB/T261-2008 Test Methods for Flash Point of Petroleum Products oil (Pensky-Martens Closed Cup Methods).

2. ASTM D93

Introduction:

Gold ASTM D93 GD-261 Flash Point Laboratory Tester For Oil is used to determine the the flash point of petroleum products by pinsky martens closed cup methods.

Characteristics:

1. Economical type.

2. Standard oil cup made by brass.

3.  Electric stirring device.

Technical Parameter:

1. Power supply: AC 220V±10%, 50 Hz;

2. Heating device:

(1) The furnace is made of SiC materials; its power is 600 W;

(2) Heating power is adjustable in the range of 0~600W;

3. Sample temperature rising rate: 1~12°C per minute, manually controlled;

4. Electric stirring device:

(1) Stirring motor: 45TYZ Motor;

(2) Driving device: by a soft shaft;

(3) Stirring blade specification: 8×40 mm;

5. Stirring speed: As per the requirement of GB/T261-2008;

(1) 90~120 RPM for procedure A;

(2) 250±10 RPM for procedure B;

6. Standard oil cup: As per the requirement of GB/T261-2008;

(1) Inner diameter: 50.7~50.8 mm;

(2) Depth: 55.7~56.0 mm;

(3) Depth of Marked line on the oil cup: 33.9~34.3 mm;

(4) Oil sample cubage: about 70 ml;

7. Ignition device (Flame application device):

(1) Ignition source: Coal gas (or other civilian combustible gas);

(2) Aperture of ignition device: 0.8 mm;

8. Thermometer: Rod type Mercury Thermometer, as per GB/T261-2008;

(1) Temperature range: -5~110°C, Each scale division is 0.5 °C;

(2) Temperature range: 20~150°C, Each scale division is 1.0 °C;

(3) Temperature range: 90~370°C, Each scale division is 2 °C;

9. Ambient temperature: ≤35°C;

10. Relative humidity: ≤85%;

11. Total power consumption: not more than 650 W;

Spare Parts:

Packing&Delivery

After-sales Service  

1. Warranty :12 month  

2.Engineers available to service machinery overseas

3.Provide free installation and debugging, staff training, technical guidance